Complete Diagnostics Database

Dacor Error Codes
& Diagnostics

Find what your error code means, how serious it is, and what to do next. Covers all appliances.

How to Use This Guide

1

Enter your code

Type the code shown on your appliance display (e.g., F84)

2

Check safety/urgency

See severity level and whether to stop using immediately

3

Do safe checks only

Follow recommended DIY checks with no disassembly

4

Get professional help

If code persists, professional diagnostics are required

Complete Code Directory

Filter: Sort:
Code Appliance Meaning Severity
E1 Column Refrigeration Refrigerator compartment temperature sensor failure on Dacor DRR24 and DRR30 column refrigerator models. The NTC thermistor monitoring the cabinet interior has developed an open or short circuit, preventing the control board from accurately regulating column refrigerator temperature. High View details → E3 Column Refrigeration Defrost system fault on Dacor DRR24 and DRR30 column refrigerators. The column refrigerator has failed to complete an automatic defrost cycle, causing frost to accumulate on its dedicated evaporator and reducing cooling capacity within the column cabinet. Medium View details → E4 Column Refrigeration Evaporator fan motor failure on Dacor DRR24 and DRR30 column refrigerators. The fan responsible for circulating cold air within the column refrigerator cabinet has stopped or is running outside acceptable speed limits, causing the column cabinet to warm even while the compressor operates. High View details → HI Column Refrigeration High temperature warning on Dacor DRR24 and DRR30 column refrigerators. The column cabinet has exceeded its upper temperature threshold, alerting the user that food safety may be at risk. The cause may range from a simple door issue to an underlying refrigeration fault specific to the DRR-series. Medium View details → PF Column Refrigeration Power failure notification on Dacor DRR24 and DRR30 column refrigerators. The column unit detected an interruption in electrical supply and is alerting the user to verify food safety following the power restoration. The column refrigerator resumes cooling automatically. Low View details → E1 Cooktop Incompatible or absent cookware detected on a Dacor DTI-series induction cooktop. The zone sensor cannot detect a ferromagnetic vessel of sufficient size, and the zone will not energize to prevent energy waste and surface overheating. Low View details → E3 Cooktop Input voltage out of range on a Dacor DTI-series induction cooktop. The unit has detected that the supply voltage is significantly above or below the 240V nominal required for safe operation, and has suspended all cooking functions. Medium View details → F1 Cooktop Internal control board failure detected on Dacor induction cooktop (DTI30/DTI36). The main PCB has encountered a critical self-diagnostic fault and cannot safely regulate induction coil power output. High View details → F2 Cooktop Temperature sensor (thermistor) fault on a Dacor induction cooktop. The control board cannot read a valid temperature signal from one or more zone sensors, triggering a safety shutdown to prevent overheating. High View details → F3 Cooktop Cooling fan failure detected on a Dacor DTI-series induction cooktop. The internal fan that protects the power electronics from overheating has stopped or slowed below the minimum speed threshold, triggering a protective shutdown. High View details →

Safety Notices & Recalls

Stay informed about product safety notices, recalls, and important updates affecting your appliances.

View safety alerts

If your error code returns after basic checks, professional diagnostics may be required.

Schedule Appointment

Related Resources

For official Dacor support, visit Dacor Owner Support.