Dacor Column Refrigeration PF Error: Power failure alert
This dacor column refrigerator error code pf guide explains what this fault means for your Dacor appliance and how to respond safely. What Error Code PF Means Error code PF on Dacor DRR24 and DRR30 column refrigerators is a power failure notification. The unit detected a power supply interruption and resumes cooling automatically when power […]
15%
DIY Fixable
From $275
Typical Repair Cost
60-120 min
Pro Repair Time
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. PF is informational only. The column refrigerator is cooling normally after power restoration. Assess food safety based on outage duration.
Can I reset the code?
Yes. Press any panel button to immediately clear PF. No further unit action is required if cooling has resumed normally.
When to stop immediately?
Stop if you notice: Stop and call an electrician if PF appears repeatedly without a known outage., Stop if PF is accompanied by E-series fault codes after power restoration..
Symptoms You May Notice
PF displayed on column refrigerator panel post-restoration
The DRR24 or DRR30 control display shows PF immediately after power is restored, prompting the user to acknowledge the interruption.
Audible alarm with PF code
A beeping alert accompanies the PF display until dismissed by pressing a panel button.
Column refrigerator resumes cooling normally
Compressor and fan restart automatically. PF does not indicate a unit malfunction — only a power event.
Display shows current cabinet temperature
After PF is acknowledged, the display returns to showing the actual and set cabinet temperatures.
Possible Causes
Household power outage
A utility interruption cut electrical supply to the column refrigerator circuit.
DIY PossibleCircuit breaker trip
The column refrigerator's dedicated or shared circuit breaker tripped due to overload or a momentary fault.
DIY PossibleLoose outlet connection or power cord
A column refrigerator installed in cabinetry may have a partially-seated power cord at the wall outlet behind the unit.
DIY PossibleSafe Checks You Can Do
-
1
Press any panel button to clear PF
Touch any button on the DRR24/DRR30 control panel to acknowledge and clear the PF notification. The column refrigerator will continue cooling normally.
If the panel is locked, hold the lock button for 3 seconds to unlock before acknowledging PF.
-
2
Verify cabinet temperature and food safety
Check the displayed cabinet temperature. If above 40°F (4°C) for more than 2 hours, assess perishables for safety. A column refrigerator that was well-sealed typically maintains safe temperatures for 4 hours without power.
Column refrigerators have excellent insulation due to their built-in cabinetry design — temperatures often recover quickly.
-
3
Check breaker and outlet connection
If PF appeared without a known outage, check the circuit breaker panel. For column refrigerators in cabinetry, verify the outlet connection behind the unit is secure — these can loosen over time from vibration.
Dacor recommends a dedicated 20A circuit for DRR-series column refrigerators to prevent overload trips.
When to Call a Professional
Contact a qualified technician if:
- PF recurs multiple times per week — dedicated circuit or outlet inspection required.
- Heat damage at the outlet behind the column refrigerator — electrical hazard.
- PF accompanied by active E-series codes — unit did not restart correctly, needs technician.
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Column Refrigeration Repair Service Schedule Appointment