Dacor Refrigerator PF Error: Power failure alert
This dacor refrigerator error code pf guide explains what this fault means for your Dacor appliance and how to respond safely. What Error Code PF Means Error code PF on Dacor DRF36, DRF42 French Door and DRZ36/DRZ30 built-in refrigerators is a power failure notification. The unit detected that electrical power was interrupted and is alerting […]
20%
DIY Fixable
From $250
Typical Repair Cost
60-120 min
Pro Repair Time
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. PF is an informational alert. The refrigerator itself is functioning correctly. Assess food safety based on how long power was interrupted.
Can I reset the code?
Yes. Press any control panel button to immediately clear PF. No further action on the unit is needed if cooling has resumed normally.
When to stop immediately?
Stop if you notice: Stop and call an electrician if PF appears repeatedly without a known power outage — an intermittent circuit fault is present., Stop using the refrigerator if PF is accompanied by E-series fault codes indicating the unit did not restart correctly..
Symptoms You May Notice
PF flashing on display after power restoration
The control panel displays PF or a power failure icon immediately after power is restored, indicating the unit was without power.
Display shows previous set temperatures
Compartment temperature set points are retained in memory, but actual internal temperatures may have risen during the outage.
Unit resumes cooling normally
The compressor and fans restart automatically once power is restored, and the unit cools back down to set temperatures.
Alarm tone accompanies the code
An audible beeping alarm sounds alongside PF to ensure the user notices and acknowledges the power interruption.
Possible Causes
Household power outage
A utility power failure interrupted supply to the refrigerator circuit for any duration.
DIY PossibleTripped circuit breaker
The kitchen or dedicated refrigerator circuit breaker tripped due to overload or a momentary fault.
DIY PossibleLoose power cord or outlet fault
A loose connection at the wall outlet or the refrigerator's power cord caused an intermittent power loss.
DIY PossibleSafe Checks You Can Do
-
1
Acknowledge and clear the alert
Press any button on the control panel (or the dedicated Alarm Reset button if present) to silence the alarm and clear the PF display. The unit will resume normal operation.
On Dacor models with a touchscreen interface, a single tap on the alarm icon clears PF.
-
2
Check food safety
If the power was out for more than 4 hours, check the internal thermometer or use a food thermometer on perishables. Discard any food that has been above 40°F (4°C) for more than 2 hours.
A refrigerator thermometer left inside gives you an accurate record of the highest temperature reached.
-
3
Inspect the outlet and circuit breaker
If PF appears without a known power outage, check the circuit breaker panel for a tripped breaker, and ensure the refrigerator's power plug is firmly seated in the wall outlet.
Dacor recommends a dedicated 20A circuit for French Door refrigerators to prevent nuisance trips.
When to Call a Professional
Contact a qualified technician if:
- PF occurs multiple times per week without a known power outage — electrical inspection needed.
- The outlet or power cord shows burn marks or the plug feels warm — fire hazard risk.
- PF appears alongside active cooling fault codes after power restoration.
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Refrigerator Repair Service Schedule Appointment