Dacor range lp conversion notice — essential information for Dacor appliance owners.
Dacor range LP conversion safety procedures must be followed precisely to prevent over-pressurization, incomplete combustion, and carbon monoxide accumulation when switching fuel types.
Why This Matters
Dacor DOP and ER-series ranges ship configured for natural gas. LP propane burns at a different pressure and requires smaller orifice jets and regulator adjustment. An incorrect conversion can produce dangerous yellow flames, sooting, and elevated carbon monoxide output.
Warning Signs of an Incorrect Conversion
- Yellow or orange burner flames instead of blue
- Strong odor during combustion
- Soot deposits on cookware or above the burner
- Oven temperature that does not match the set point
Recommended Actions
- Use only the LP conversion kit supplied by Dacor for your specific model.
- Have the conversion performed by a licensed gas technician.
- Verify regulator inlet pressure matches LP specifications after conversion.
- Test all burners for correct blue-flame combustion before regular use.
Post-Conversion Verification
After converting a Dacor Heritage or Modernist gas range to LP propane, the technician should verify all burner flame heights at both the minimum and maximum settings. The LP conversion label must be affixed near the model and serial number plate to indicate the fuel type change for future service reference. Keep the original natural gas orifice kit in a labeled bag near the range in case a reverse conversion is needed. Carbon monoxide detector installation is strongly recommended in any kitchen with a gas or LP range, and the detector should be tested monthly to confirm proper function.
Do not operate the range if flames are yellow or sooting is present.
Related Resources
Use these resources to stay up to date on Dacor safety matters and connect with a technician.
For additional safety information, visit Dacor Owner Support or the CPSC Recall Database.