Freezer Low Severity
PF Appliance Error Code

Dacor Freezer PF Error: Power failure alert

This dacor freezer error code pf guide explains what this fault means for your Dacor appliance and how to respond safely. What Error Code PF Means Error code PF on Dacor DRZ24 and DRZ30 column freezers is a power failure notification. The unit detected that electrical supply was interrupted and is alerting you to verify […]

By Lucy Brennan Senior Appliance Technician & Content Reviewer

20%

DIY Fixable

From $225

Typical Repair Cost

60-90 min

Pro Repair Time

Quick Assessment

Answer to continue safely

Is it safe to keep using?

Yes. PF is informational. The freezer is cooling normally. Evaluate food safety based on outage duration rather than the code itself.

Can I reset the code?

Yes. Press any control panel button to immediately acknowledge and clear PF. No other action on the unit is required.

When to stop immediately?

Stop if you notice: Stop and call an electrician if PF recurs multiple times without a known outage., Stop if PF is accompanied by an active fault code (F1, F3, F4) after power restoration..

Symptoms You May Notice

PF shown on panel after power restoration

The DRZ24/DRZ30 control panel displays PF immediately after power is restored following an outage or circuit interruption.

Audible alarm tone accompanies the code

An alert beep sounds continuously until the PF code is acknowledged by pressing a panel button.

Unit resumes cooling automatically

The compressor and fan restart normally upon power restoration; PF is purely an informational notification.

Temperature display shows current cabinet reading

The cabinet temperature shown may be higher than the set point if power was out for an extended duration.

Possible Causes

1

Utility power outage

A household or neighborhood power failure interrupted supply to the freezer circuit.

DIY Possible
2

Tripped circuit breaker

The freezer's circuit breaker tripped due to overload, GFCI test, or momentary fault.

DIY Possible
3

Intermittent connection at outlet or power cord

A loose plug or failing wall outlet caused momentary power loss without a full outage.

DIY Possible

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Acknowledge and clear the PF alert

    Press any button on the DRZ24/DRZ30 control panel to silence the alarm and dismiss PF. The freezer will continue cooling normally.

    On models with a lock button, ensure the control panel is not locked before pressing — hold the lock button for 3 seconds to unlock if needed.

  2. 2

    Assess food safety based on outage duration

    A fully-loaded freezer maintains safe temperatures for approximately 48 hours with the door closed during a power outage. A half-full freezer is safe for about 24 hours. Use a thermometer to confirm the cabinet temperature is at or below -18°C (0°F).

    Ice crystals still visible on food and cabinet temperature below -9°C (15°F) indicates food is safe to keep.

  3. 3

    Check circuit breaker and outlet

    If PF appeared without a known outage, inspect the breaker panel for a tripped breaker and confirm the power cord is firmly seated in the wall outlet.

    Dacor DRZ column freezers require a dedicated 15A or 20A circuit — sharing a circuit can cause nuisance trips.

When to Call a Professional

Contact a qualified technician if:

  • PF appears multiple times per week with no known power outages — electrical inspection required.
  • Outlet or cord shows heat damage — do not plug back in until inspected by an electrician.
  • PF appears alongside other active error codes suggesting the unit did not restart correctly.

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Freezer Repair Service Schedule Appointment

More Freezer Error Codes

View all codes →
HI F4 F3 F1

Related Resources

Dacor Freezer Error Codes → Schedule a Repair Appointment →